The MPO connector is a type of fiber connecter. MPO (Multi-Fiber Push On) is a multi-core fiber connecter type. The MPO high -density fiber pre -connection system is currently mainly used in the application of high -density environments of data centers, the application of optical fiber to the building, and the internal connection applications inside the optical transceiver equipment such as the optical device, 40G, 100G, QSFP+.
The MPO connector is a type of fiber connecter. MPO (Multi-Fiber Push On) is a multi-core fiber connecter type. The MPO high -density fiber pre -connection system is currently mainly used in the application of high -density environments of data centers, the application of optical fiber to the building, and the internal connection applications inside the optical transceiver equipment such as the optical device, 40G, 100G, QSFP+.
MPO connector types are distinguished according to the IEC 61754-7 regulations: core numbers (array number), male head (Male, Female), polarity (PC or APC).
MPO-MPO 3.0mm LSZH Fiber Patch Cord. MPO Fiber Patch Cord is terminated with MPO connector on both ends. MPO Fiber Patch Cord connect MPO modules together as a permanent link. The MPO Fiber Patch Cord are available with 12, 24, 48,60,72 ,96,144fibers. Support speeds up to 10/40/100Gbps data center solutions. They are typically adopted to interconnect cassettes, panels or ruggedized MPO fan-outs, and to facilitate rapid deployment of high-density backbone cabling in data centers and other high fiber environments. Besides, MPO also provides much flexibility and convenience once you have to change the connector style in the patch panels. Instead of changing the connector on the cable trunk, just installing a new cassette with the new connector style on the crossconnect side of the patch panel.
The 12F MPO-MPO Fiber Patch Cord is designed for 40G QSFP+ SR4, 40G QSFP+ CSR4 and 100G QSFP28 SR4 optics direct connections and high-density data center.
Connectors’ Industrial Standard:
Connector
Reference
Housing Details
MPO Singlemode
IEC 61754-7
SM APC: Green connectors+black boot (Standard Loss MPO)
SM APC: Yellow connectors+black boot (Super low loss MPO)
MPO Multimode
IEC 61754-7
OM1&OM2 PC: Beige connectors+black boot (Standard Loss MPO)
OM3&OM4 PC: Aqua connectors+black boot (Standard&Super low loss MPO)
OM3&OM4 PC: Heather Violet connectors+black boot (Standard loss MPO)
Meets IEC Standard IEC-61754-7; IEC61755, Telcordia GR-1435-CORE, JIS C5982; TIA-604-5(FOCIS5) compliant Structured cabling per TIA-568-C
10G Fiber Channel Compliant
40G and 100G IEEE 802.3
Optical Specifications:
Spec items.
Single mode (APC 8-degree polished)
Multimode (PC Flat polish)
nsertion loss (MPO)
(IEC 61300-3-34)
Standard loss:≤0.75dB(max), ≤0.50dB(Typical)
Super Low loss:≤0.35dB(max), ≤0.20dB(Typical)
Standard loss:≤0.6dB(max), ≤0.50(Typical)
Super Low loss:≤0.35dB(max) , ≤0.20dB(Typical)
Insertion loss (LC/SC/FC/ST)
(IEC 61300-3-6)
≤0.3dB
≤0.3dB
Return loss(MPO)
≥60dB(8degree polishing)
≥25dB
Return loss(LC/SC/FC/ST)
APC≥60dB; UPC≥50dB
≥35dB
Durability
<0.3dB typical change, 200 matings
Interchangeability
≤0.2dB
Tensile strength
>70N
Plug -in times
≤500
Operating Temperature (℃)
·-40 to + 85°C
Features:
Low insertion loss, high return loss
MT based Multi-fiber Connector, 4,8,12 and 24 fiber connector terminations and assemblies
Economical solution for mass-termination of fiber
Designed for low loss and standard loss SM and MM applications
Ruggedized round cable, oval cable and bare ribbon options available
Color coded housings available to differentiate fiber type, polish type and/or connector grade
Good in repeatability and exchangeability
Application:
All of OMC’s MPO Connectors are from Senko/Nissin/Sumitomo. MPO Fiber Patch Cord is a kind of high density cable assemblies which is generally use in three areas.
The Data Center application with high dense degree environment
The optical fiber to the building
The internal connector application in fiber equipment.
Naming Rules&Order Confirmation Information:
Push Pull Tab For Senko MPO
Note: Female connector need to connect with male connector type.
MPO-MPO 24F Fiber Patch Cord drawing
Overall Length(L)(m)
length of tolerance(cm)
0<L<1
+5/-0
1<L<10
+10/-0
10<L<40
+15/-0
40<L
‘+0.5% x L/-0
Three Connection Methods Help Keep the Right MTP/MPO Polarity
Base-24 Polarity Solution
To catch up with the increased demand for higher bandwidth, 24-fiber MTP/MPO cable is introduced to facilitate migration to 100G network. It doubles the density of 12-fiber cabling in the same footprint, which reduces the fiber count,allows for fewer cable pathway, and improving airflow. The polarity maintenance of base-24 MTP/MPO cabling, however, is more complicated. OMC recommends the Type A (key-up to key-down) MTP/MPO trunk cable. With our Type Aand Type AF cassette, no need for A-to-A patch cable any more. The connectivity method is illustrated in the following picture
Zion Communication’s Hot MPO/MTP Patch Cord
Zion Code
Zion Description
7236001
ZCM1122HIA1X
MPO Female To MPO Female SM 3.0mm LSZH 12 Fibers MPO Patch Cord Custom Meters
7236002
ZCM1152HIA1X
MPO Female To MPO Female SM 3.0mm LSZH 24 Fibers MPO Patch Cord Custom Meters
This easily taken and well-protected fiber optical cable package has been labelled and marked by OMC as default. Standard carton size: 34*22*15 cm; 44*34*24 cm ; 54*39*34 cm . Which carton to be used depends on goods Qty. Packing can be customized.
OEM/ODM service for you
1. Cable color, printing word, material of cable jacket, connector’s color
2. OEM Label, Identify ring, cable’s label,box, shipping marks
3. Different quality Level.
Download
Email us, Call us, Meeting online with us!
Tell us about your purchasing plans!
We specializing in designing, manufacturing communications infrastructure & equipment and providing customized services for our customers!