The MPO connector is a type of fiber connecter. MPO (Multi-Fiber Push On) is a multi-core fiber connecter type. The MPO high-density fiber pre-connection system is currently mainly used in the application of high-density environments of data centers, the application of optical fiber to the building, and the internal connection applications inside the optical transceiver equipment such as the optical device, 40G, 100G, QSFP+.
The MPO connector is a type of fiber connecter. MPO (Multi-Fiber Push On) is a multi-core fiber connecter type. The MPO high-density fiber pre-connection system is currently mainly used in the application of high-density environments of data centers, the application of optical fiber to the building, and the internal connection applications inside the optical transceiver equipment such as the optical device, 40G, 100G, QSFP+.
MPO connector types are distinguished according to the IEC 61754-7 regulations: core numbers (array number), male head (Male, Female), polarity (PC or APC).
8 cores MPO to Duplex( 4xLC uniboot);Simplex ( 4xLC ) Straight harness Cables assemblies.
MPO- LC/SC/FC/ST Straight harness Cables are terminated with MPO and LC/SC/FC/ST connector on both ends. The 8pcsDuplex( 4xLC uniboot);Simplex ( 4xLC ) fanout cables are optimized for 40G QSFP+ PLR4 to 10G SFP+ LR optics direct connection and high-density data center applications. have same length. It’s specifically designed for high-density fiber patching in data centers which need space saving and reduce cable management troubles.
SM 8F MPO- LC/SC/FC/ST Straight harness Cables are optimized for 40G QSFP+ PLR4 to 10G SFP+ LR optics direct connection and high-density data center applications.This 8 Fiber harness cable is used for a direct connection between QSFP+ to (4) SFP+ ports with no patch panels or intermediate trunks in between.
Connectors’ Industrial Standard:
Connector
Reference
Housing Details
MPO Singlemode
IEC 61754-7
SM APC: Green connectors+black boot (Standard Loss MPO)
SM APC: Yellow connectors+black boot (Super low loss MPO)
MPO Multimode
IEC 61754-7
OM1&OM2 PC: Beige connectors+black boot (Standard Loss MPO)
OM3&OM4 PC: Aqua connectors+black boot (Standard&Super low loss MPO)
OM3&OM4 PC: Heather Violet connectors+black boot (Standard loss MPO)
Meets IEC Standard IEC-61754-7; IEC61755, Telcordia GR-1435-CORE, JIS C5982; TIA-604-5(FOCIS5) compliant Structured cabling per TIA-568-C
10G Fiber Channel Compliant
40G and 100G IEEE 802.3
Other connectors’ Industrial Standard:
SC: TIA/EIA, FOCIS3, GR-326.NTT-SC IEC61754-4 and JIS C5973
LC: TIA/EIA, FOCIS10, GR-326 EIA/TIA-604-10, IEC61754-20 and JIS C5973.
FC: EIA /TIA-604-04, FOCIS4, NTT-FC, GR-326. IEC61754-13 and JIS C5973
ST: TIA/EIA, FOCIS2, GR-326. IEC61754-2 and JIS C5973 Etc
Standard loss:≤0.75dB(max), ≤0.50dB(Typical)
Super Low loss:≤0.35dB(max), ≤0.20dB(Typical)
Standard loss:≤0.6dB(max), ≤0.50(Typical)
Super Low loss:≤0.35dB(max) , ≤0.20dB(Typical)
Insertion loss (LC/SC/FC/ST)
(IEC 61300-3-6)
≤0.3dB
≤0.3dB
Return loss(MPO)
≥60dB(8degree polishing)
≥25dB
Return loss(LC/SC/FC/ST)
APC≥60dB; UPC≥50dB
≥35dB
Durability
<0.3dB typical change, 200 matings
Interchangeability
≤0.2dB
Insert-pull Test
500times, IL<0.5dB
Tensile strength
>70N
Operating Temperature(℃)
·-40 to + 85°C
Features:
Low insertion loss, high return loss
MT based Multi-fiber Connector, 4,8,12 and 24 fiber connector terminations and assemblies
Economical solution for mass-termination of fiber
Designed for low loss and standard loss SM and MM applications
Ruggedized round cable, oval cable and bare ribbon options available
Color coded housings available to differentiate fiber type, polish type and/or connector grade
Good in repeatability and exchangeability
The merits of MTP/MPO Patch cable/trunk cable generally include:
High quality—MTP/MPO Patch cable/trunk cables are factory pre-terminated, tested and packaged along with the test reports. These reports serve as long-term documentation and quality control.
Decreasing cable volume—MTP/MPO Patch cable/trunk cables have very small diameters, which decrease the cable volume and improve the air-conditioning conditions in data centers
Time saving—With the special plug and play design, MTP/MPO Patch cable/trunk cables can be incorporated and immediately plugged in. It greatly helps reduce the installation time.
Application:
SM 8F MPO- LC/SC/FC/ST Straight harness Cables are optimized for 40G QSFP+ PLR4 to 10G SFP+ LRopticsdirect connection and high-density data center applications.
This 8 Fiber harness cable is used for a direct connection between QSFP+ to (4) SFP+ ports with no patch panels or intermediate trunks in between.
All of OMC’s MPO Connectors are from Senko/Nissin/Sumitomo. MPO Fiber Patch Cord is a kind of high density cable assemblies which is generally use in three areas.
The Data Center application with high dense degree environment
The optical fiber to the building
The internal connector application in fiber equipment.
Naming Rules&Order Confirmation Information:
Zion Communication’s Hot MPO/MTP -LC Straight harness Cables
Zion Code
Zion Description
7236037
ZCM11A12HIAX
8F MPO SM Fiber Optic MPO-LC 2.0mm Straight harness Cables
7236038
ZCM11A22HIAX
12F MPO SM Fiber Optic MPO-LC 2.0mm Straight harness Cables
7236039
ZCM11A52HIAX
24F MPO SM Fiber Optic MPO-LC 2.0mm Straight harness Cables
Three Connection Methods Help Keep the Right MTP/MPO Polarity
MPO –8 x LC Simplex structure-Type 1
Fanout 2.0mm or 0.9mm OD leg, Fanout length: 0.5m
MPO can be Female and Male, Main cable OD:3.0mm
The cable’s Polarity method is not fixed. Customer can use it in Polarity A and B freely.
Other connectors such as SC, FC, E2000… are available
MPO –4 x LC Duplex structure-Type 2
Fanout 2.0×4.1mm/0.9mm OD leg, Fanout length: 0.5m
MPO can be Female and Male, Main cable OD:3.0mm
The cable’s Polarity method is not fixed. Customer can use it in Polarity A and B freely.
Other connectors such as SC, FC, E2000… are available
MPO –4 x Uniboot LC structure-Type 3
Fanout 2.0×4.1mm/0.9mm OD leg, Fanout length: 0.5m
MPO can be Female and Male, Main cable OD:3.0mm
The cable’s Polarity method is not fixed. Customer can use it in Polarity A and B freely.
Other connectors such as SC, FC, E2000… are available
Material’s details
Packaging
This easily taken and well-protected fiber optical cable package has been labelled and marked by OMC as default. Standard carton size: 34*22*15 cm; 44*34*24 cm; 54*39*34 cm. Which carton to be used depends on goods Qty. Packing can be customized.
OEM/ODM service for you
Cable color, printing word, material of cable jacket, connector’s color
OEM Label, Identify ring, cable’s label, box, shipping marks
Different quality Level.
Download
Email us, Call us, Meeting online with us!
Tell us about your purchasing plans!
We specializing in designing, manufacturing communications infrastructure & equipment and providing customized services for our customers!