Optical fiber systems & Copper cabling infrastructure products | Good quality and good service based on reasonable prices.

Search
Close this search box.

Fiber systems & copper cabling systems products | Good quality and good service based on reasonable prices.

Search
Close this search box.

3 in 1 Precon Harden Factory Assembly Reinforced Optical Connector-ZC31PHROC

1) Waterproof level: IP68
2) Compatible with Slim connector
3) Fully compatible with the connector systems of Furukawa slim connector
4) Field installation, easily mounted on the field optical connector, no required for any specific tools or devices
5) Low insert loss and high return loss
6) High mechanical strength performance
7) PEI material, Acid and alkali resistance, Ultraviolet resistance
8) Outdoor use, 20-year service life
9) Apply to Field Assembly Optical Connector type: Slim/APC, Slim/PC

3 in 1 Precon Harden Factory Assembly
Reinforced Optical Connector-ZC31PHROC

3 in 1 Precon Harden Factory Assembly Reinforced Optical Connector ZC31PHROC

Brief Overview

This kind of 3 in 1 Precon Harden Factory Assembly Reinforced Optical Connector design and producing
from PLD company, it has compatible for Optitap, Slim and Fast Connect all in one with connector body,
apply to outer cable diameter:
3.0mm and 5.0mm round cable, 2.0*5.3mm and 2.0*3mm pre-connectorized on drop cable.
Please welcome for contacting us for more RFQ.

 

Application

1) FTTH
2) Outdoor FTTX Solution
3) Harsh Environment

 

Features

1) Waterproof level: IP68
2) Compatible with Slim connector
3) Fully compatible with the connector systems of Furukawa slim connector
4) Field installation, easily mounted on the field optical connector, no required for any specific tools or devices
5) Low insert loss and high return loss
6) High mechanical strength performance
7) PEI material, Acid and alkali resistance, Ultraviolet resistance
8) Outdoor use, 20-year service life
9) Apply to Field Assembly Optical Connector type: Slim/APC, Slim/PC

Technical Parameter

Table 1 is as follows
Items Methods Standard Samples Chosen
Visual
Inspection
1. Visual inspection
2. 200 times agnifying lass
1, the surface can not appear obvious scratches, corners,
deformation and other defects, product
specifications and models and actual compliance.
2. See Table 2.
General inspection level I, AQL 0.65
Geometric Size CCD projector detection According to the drawings General inspection level I, AQL 0.65
End Face
Geometry
Index
3D detector detection Polish Type Curvature Radius
(mm)
Vertex Shift
Amount (μm)
Concavity and Convexity (nm) General inspection level I, AQL 0.65
PC Type
(Ф2.5mm)
10~25 ≤50 -100~+50 General inspection level I, AQL 0.65
PC Type
(Ф1.25mm)
7~25 ≤50 -100~+50
APC Type
(Ф2.5mm)
5~12 ≤50 -100~+50
APC Type
(Ф1.25mm)
5~1 ≤50 -100~+50
Insertion
Loss
Loss detector standard line
detection method
PC: Average Value: ≤0.25dB, Maximum Value: ≤0.4dB
APC: Average Value: ≤ 0.25 dB, Maximum Value: ≤ 0.4 dB
General inspection level I, AQL 0.65
Return
Loss
Loss detector standard line
detection method
PC: ≥ 45 dB,
APC: ≥ 50 dB
General inspection level I, AQL 0.65
Average
Assembly
Time
Normal skilled operator ≤2.5Mins General inspection level II, AQL 0.65
One
Assembly
Success
Rate
Normal skilled operator ≥98% At least 98 per assembly
Repeated
Assembly
Normal skilled operator ≥5 Times Special inspection level S-I level, AQL 0.65

 

Table 2 is as follows
Items Methods Judgments Standard
Insertion Loss Loss detector standard line detection method PC: average value: ≤0.3dB, maximum value: ≤0.5dB, APC: average
value: ≤ 0.25 dB, maximum value: ≤ 0.4 dB.
Return Loss Loss detector standard line detection method PC: ≥ 45 dB, APC: ≥ 50 dB.
Average Assembly Time Normal skilled operator ≤2.5Mins
One Assembly Success rate Normal skilled operator ≥95%
Repeatability Insert 10 times Insertion loss change: ≤0.2dB, return loss change: ≤4dB. No mechanical
damage, such as deformation, cracks, Chi and other phenomena
High Temperature +85℃, 96hrs Insertion loss change: ≤0.3dB, return loss change: ≤4dB. No mechanical
damage, such as deformation, cracks, Chi and other phenomena
Damp Heat +75℃, 95%, 96hrs Insertion loss change: ≤0.3dB, return loss change: ≤4dB. No mechanical
damage, such as deformation, cracks, Chi and other phenomena
Soaking Water 25±2℃, 168hrs, tap water Insertion loss change: ≤0.3dB, return loss change: ≤4dB. No mechanical
damage, such as deformation, cracks, Chi and other phenomena
Repeated Assembly Assembly Times: 5 Times Insertion loss change: ≤0.3dB, return loss change: ≤4dB. No mechanical
damage, no obvious scratches on the surface of the pin.
Vibration (Sine) Frequency: 10-50Hz
Sweep: 45 times per minute
Amplitude: 0.75mm single amplitude Time: three directions, each 2hrs
Insertion loss change: ≤0.3dB, return loss change: ≤4dB. No mechanical
damage, no obvious scratches on the surface of the pin.
Fall Test Height: 1.5m No. of times: 8 times Insertion loss change: ≤0.3dB, return loss change: ≤4dB. No mechanical
damage, such as deformation, cracks, Chi and other phenomena
Mechanical Durability Plug and Pull>10 Times Insertion loss change: ≤0.3dB, return loss change: ≤4dB. No mechanical
damage, such as deformation, cracks, Chi and other phenomena.
Tensile Cable Type: 20N, online measurement; Cable Type: 30N, not measured online, the time is 2 minutes. Insertion loss change: ≤0.3dB, return loss change: ≤4dB. No mechanical
damage, such as deformation, cracks, Chi and other phenomena.
Torsion (optical cable type) Load: 15N Rate: 10 times / min No. of times: 100 times Insertion loss change: ≤0.3dB, return loss change: ≤4dB. No mechanical
damage, such as deformation, cracks, Chi and other phenomena.

 

Download
LC SX Plastic Fiber Optic AdapterCoupler with Flange 2

 

Email us, Call us, Meeting online with us!

Tell us about your purchasing plans!

We specializing in designing, manufacturing communications infrastructure & equipment and providing customized services for our customers!

Email:sales@hello-signal.com
Give Us A Call​​:+86 15715730101

Get A Free Quote

Fill Out The Form To Get Our Latest Catalog