The MTP connector is a type of fiber connecter. MTP (Multi-fiber Termination Push-on) is a multi-core fiber connecter type. The MTP high-density fiber pre-connection system is currently mainly used in the application of high-density environments of data centers, the application of optical fiber to the building, and the internal connection applications inside the optical transceiver equipment such as the optical device, 40G, 100G, QSFP+.
The MTP connector is a type of fiber connecter. MTP (Multi-fiber Termination Push-on) is a multi-core fiber connecter type. The MTP high -density fiber pre-connection system is currently mainly used in the application of high -density environments of data centers, the application of optical fiber to the building, and the internal connection applications inside the optical transceiver equipment such as the optical device, 40G, 100G, QSFP+.
MTP connector types are distinguished according to the EIA/TIA-604-5 regulations: core numbers (arraynumber), male head (Male, Female), polarity (PC or APC).
24 cores MTP Female to 12 LC Duplex( 12xLC uniboot;24 LC Simplex) 24F MTP- LC/SC/FC/ST Straight harness Cables are terminated with MTP and LC/SC/FC/ST connector on both ends. The 24pcs(12pcs for LC uniboot;24 LC Simplex) fanout cables are optimized for 40G QSFP+ PLR4 to 10G SFP+ LR optics direct connection and high-density data center applications. have same length. It’s specifically designed for high-density fiber patching in data centers which need space saving and reduce cable management troubles.
24F MTP- LC/SC/FC/ST Straight harness Cables designed for 100GBASE-SR10 CXP/CFP Interconnect Solution,100GBASE-LR4 and high-density data center. It is optimized for 10/40/100G high-density data center applications. This 24 Fiber harness cable is used for connecting (12) SFP+ into a MTP adapter panel and MTP trunk.
Connectors’ Industrial Standard:
Connector
Reference
Housing Details
MTP Singlemode
EIA/TIA-604-5
SM APC: Green connectors+black boot (Standard Loss MTP)
SM APC: Yellow connectors+black boot (Super low loss MTP)
MTP Multimode
EIA/TIA-604-5
OM1&OM2 PC: Beige connectors+black boot (Standard Loss MTP)
OM3&OM4 PC: Aqua connectors+black boot (Standard&Super low loss MTP)
OM3&OM4 PC: Heather Violet connectors+black boot (Standard loss MTP)
Meets IEC Standard IEC-61754-7; IEC61755, Telcordia GR-1435-CORE, JIS C5982; TIA-604-5(FOCIS5) compliant Structured cabling per TIA-568-C
10G Fiber Channel Compliant
40G and 100G IEEE 802.3
Other connectors’ Industrial Standard:
SC: TIA/EIA, FOCIS3, GR-326.NTT-SC IEC61754-4 and JIS C5973
LC: TIA/EIA, FOCIS10, GR-326 EIA/TIA-604-10, IEC61754-20 and JIS C5973.
FC: EIA /TIA-604-04, FOCIS4, NTT-FC, GR-326. IEC61754-13 and JIS C5973
ST: TIA/EIA, FOCIS2, GR-326. IEC61754-2 and JIS C5973 Etc
Standard loss:≤0.75dB(max), ≤0.50dB(Typical)
Super Low loss:≤0.35dB(max), ≤0.20dB(Typical)
Standard loss:≤0.6dB(max), ≤0.50(Typical)
Super Low loss:≤0.35dB(max) , ≤0.20dB(Typical)
Insertion loss (LC/SC/FC/ST)
(IEC 61300-3-6)
≤0.3dB
≤0.3dB
Return loss(MTP)
≥60dB(8degree polishing)
≥25dB
Return loss(LC/SC/FC/ST)
APC≥60dB; UPC≥50dB
≥35dB
Durability
<0.3dB typical change, 200 matings
Interchangeability
≤0.2dB
Insert-pull Test
Above 600 times, IL<0.5dB
Tensile strength
>70N
Operating Temperature (℃)
·-40 to + 85°C
Features:
Low insertion loss, high return loss
MT based Multi-fiber Connector, 4,8,12 and 24 fiber connector terminations and assemblies
Economical solution for mass-termination of fiber
Designed for low loss and standard loss SM and MM applications
Ruggedized round cable, oval cable and bare ribbon options available
Color coded housings available to differentiate fiber type, polish type and/or connector grade
Good in repeatability and exchangeability
The merits of MTP/MPO Patch cable/trunk cable generally include:
High quality—MTP/MPO Patch cable/trunk cables are factory pre-terminated, tested and packaged along with the test reports. These reports serve as long-term documentation and quality control.
Decreasing cable volume—MTP/MPO Patch cable/trunk cables have very small diameters, which decrease the cable volume and improve the air-conditioning conditions in data centers
Time saving—With the special plug and play design, MTP/MPO Patch cable/trunk cables can be incorporated and immediately plugged in. It greatly helps reduce the installation time.
Application:
24F MTP- LC/SC/FC/ST Straight harness Cables designed for 100GBASE-SR10 CXP/CFP Interconnect Solution,100GBASE-LR4 and high-density data center. It is optimized for 10/40/100G high-density data center applications.This 24 Fiber harness cable is used for connecting (12) SFP+ into a MTP adapter panel and MTP trunk
All of OMC’s MTP Connectors are from Senko/Nissin/Sumitomo. MTP Fiber Patch Cord is a kind of high density cable assemblies which is generally use in three areas.
The Data Center application with high dense degree environment
The optical fiber to the building
The internal connector application in fiber equipment.
Naming Rules&Order Confirmation Information:
Zion Communication’s Hot MPO/MTP -LC Straight harness Cables
Zion Code
Zion Description
7236037
ZCM11A12HIAX
8F MPO SM Fiber Optic MPO-LC 2.0mm Straight harness Cables
7236038
ZCM11A22HIAX
12F MPO SM Fiber Optic MPO-LC 2.0mm Straight harness Cables
7236039
ZCM11A52HIAX
24F MPO SM Fiber Optic MPO-LC 2.0mm Straight harness Cables
Three Connection Methods Help Keep the Right MTP/MPO Polarity
MTP –24 x LC Simplex structure-Type 1
Fanout 2.0mm or 0.9mm OD leg, Fanout length: 0.5m
MPO can be Female and Male, Main cable OD:3.0mm
The cable’s Polarity method is not fixed. Customer can use it in Polarity A and B freely.
Other connectors such as SC, FC, E2000… are available
MTP –12 x LC Duplex structure-Type 2-Type A
Fanout 2.0×4.1mm/0.9mm OD leg, Fanout length: 0.5m
MPO can be Female and Male, Main cable OD:3.0mm
The cable’s Polarity method is not fixed. Customer can use it in Polarity A and B freely.
Other connectors such as SC, FC, E2000… are available
MTP –12 x LC Duplex structure-Type 2-Type B
Fanout 2.0×4.1mm/0.9mm OD leg, Fanout length: 0.5m
MTP can be Female and Male,Main cable OD:3.0mm
The cable’s Polarity method is not fixed. Customer can use it in Polarity A and B freely.
Other connectors such as SC,FC,E2000… are available
MTP –12 x LC Duplex structure-Type 2-Type C
Fanout 2.0×4.1mm/0.9mm OD leg, Fanout length: 0.5m
MTP can be Female and Male, Main cable OD:3.0mm
The cable’s Polarity method is not fixed. Customer can use it in Polarity A and B freely.
Other connectors such as SC, FC, E2000… are available
MTP –Polarity for MTP –12 x Uniboot LC structure-Type 3
Fanout 2.0mm/3.0mm OD leg, Fanout length: 0.5m
MTP can be Female and Male,Main cable OD:3.0mm
LC connector is available for many kinds of different Uni-boot LC connectors
Material’s details
Packaging
This easily taken and well-protected fiber optical cable package has been labelled and marked by OMC as default. Standard carton size: 34*22*15 cm; 44*34*24 cm; 54*39*34 cm. Which carton to be used depends on goods Qty. Packing can be customized.
OEM/ODM service for you
Cable color, printing word, material of cable jacket, connector’s color
OEM Label, Identify ring, cable’s label, box, shipping marks
Different quality Level.
Download
Email us, Call us, Meeting online with us!
Tell us about your purchasing plans!
We specializing in designing, manufacturing communications infrastructure & equipment and providing customized services for our customers!